Sartorius Basic lite Betriebsanleitung PDF herunterladen (Seite 107)

107

A/D Converter Configuration (Examples)

Example 1: Configuring the A/D Converter with a Weighing Platform Connected

Setup

(see also the chapter on “Operating the Combics", section entitled “Calibration, Adjustment")

§ Remove the cap from the back on the left of the Combics housing.

§ Move the switch to the right (toward the interface ports) (“accessible" position).

§ Set to Service mode (see the corresponding section at the beginning of this chapter).

) Select weighing platform “WP1".

) Activate the numeric menu.

Menu page “1" is displayed.

k k ) Activate menu line 9-1.

For navigating in the Operating Menu (Examples) see also chapter on

“Operating Design."

) k Select A/D converter configuration:

Standard configuration (menu item 9-1-3)

if necessary,

k or (press key k again)

Configuration for using the scale in legal metrology (menu item 9-1-4).

) Confirm selected configuration.

The selected configuration is loaded.

For a short time, the “Busy" symbol appears on the indicator, then the program returns

to indicator display of menu item 9-1-2 (“Set default: off ", Factory setting).

( ( k Select menu page “11".

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 131 132

Keine Kommentare

Sartorius Basic lite Betriebsanleitung Seite 107